feat!: Add Builder, make timeout std::time::Duration, add configurable poll_frequency, sleep between checks is relative to timeout

README.md

@@ -28,9 +28,10 @@ Simple example for interacting via ftp:
 ```rust,no_run
 use rexpect::spawn;
 use rexpect::error::*;
+use std::time;
 
 fn do_ftp() -> Result<(), Error> {
-    let mut p = spawn("ftp speedtest.tele2.net", Some(30_000))?;
+    let mut p = spawn("ftp speedtest.tele2.net", Some(time::Duration::from_secs(30)))?;
     p.exp_regex("Name \\(.*\\):")?;
     p.send_line("anonymous")?;
     p.exp_string("Password")?;
@@ -55,9 +56,10 @@ fn main() {
 ```rust,no_run
 use rexpect::spawn_bash;
 use rexpect::error::*;
+use std::time;
 
 fn do_bash() -> Result<(), Error> {
-    let mut p = spawn_bash(Some(2000))?;
+    let mut p = spawn_bash(Some(time::Duration::from_secs(2)))?;
 
     // case 1: wait until program is done
     p.send_line("hostname")?;
@@ -105,9 +107,10 @@ goes into nirvana. There are two functions to ensure that:
 ```rust,no_run
 use rexpect::spawn_bash;
 use rexpect::error::*;
+use std::time;
 
 fn do_bash_jobcontrol() -> Result<(), Error> {
-    let mut p = spawn_bash(Some(1000))?;
+    let mut p = spawn_bash(Some(time::Duration::from_secs(1)))?;
     p.execute("ping 8.8.8.8", "bytes of data")?;
     p.send_control('z')?;
     p.wait_for_prompt()?;

examples/bash.rs

@@ -1,8 +1,9 @@
 use rexpect::error::Error;
 use rexpect::spawn_bash;
+use std::time;
 
 fn main() -> Result<(), Error> {
-    let mut p = spawn_bash(Some(1000))?;
+    let mut p = spawn_bash(Some(time::Duration::from_secs(1)))?;
     p.execute("ping 8.8.8.8", "bytes")?;
     p.send_control('z')?;
     p.wait_for_prompt()?;

examples/bash_read.rs

@@ -1,8 +1,10 @@
+use std::time;
+
 use rexpect::error::Error;
 use rexpect::spawn_bash;
 
 fn main() -> Result<(), Error> {
-    let mut p = spawn_bash(Some(2000))?;
+    let mut p = spawn_bash(Some(time::Duration::from_secs(2)))?;
 
     // case 1: wait until program is done
     p.send_line("hostname")?;

examples/exit_code.rs

@@ -1,19 +1,23 @@
 use rexpect::error::Error;
 use rexpect::process::wait;
 use rexpect::spawn;
+use std::time;
 
 /// The following code emits:
 /// cat exited with code 0, all good!
 /// cat exited with code 1
 /// Output (stdout and stderr): cat: /this/does/not/exist: No such file or directory
 fn main() -> Result<(), Error> {
-    let p = spawn("cat /etc/passwd", Some(2000))?;
+    let p = spawn("cat /etc/passwd", Some(time::Duration::from_secs(2)))?;
     match p.process.wait() {
         Ok(wait::WaitStatus::Exited(_, 0)) => println!("cat exited with code 0, all good!"),
         _ => println!("cat exited with code >0, or it was killed"),
     }
 
-    let mut p = spawn("cat /this/does/not/exist", Some(2000))?;
+    let mut p = spawn(
+        "cat /this/does/not/exist",
+        Some(time::Duration::from_secs(2)),
+    )?;
     match p.process.wait() {
         Ok(wait::WaitStatus::Exited(_, 0)) => println!("cat succeeded"),
         Ok(wait::WaitStatus::Exited(_, c)) => {

examples/ftp.rs

@@ -1,8 +1,12 @@
 use rexpect::error::Error;
 use rexpect::spawn;
+use std::time;
 
 fn main() -> Result<(), Error> {
-    let mut p = spawn("ftp speedtest.tele2.net", Some(2000))?;
+    let mut p = spawn(
+        "ftp speedtest.tele2.net",
+        Some(time::Duration::from_secs(2)),
+    )?;
     p.exp_regex("Name \\(.*\\):")?;
     p.send_line("anonymous")?;
     p.exp_string("Password")?;

examples/repl.rs

@@ -3,6 +3,7 @@
 use rexpect::error::Error;
 use rexpect::session::PtyReplSession;
 use rexpect::spawn;
+use std::time;
 
 fn ed_session() -> Result<PtyReplSession, Error> {
     let mut ed = PtyReplSession {
@@ -12,7 +13,7 @@ fn ed_session() -> Result<PtyReplSession, Error> {
 
         // used for `wait_for_prompt()`
         prompt: "> ".to_owned(),
-        pty_session: spawn("/bin/ed -p '> '", Some(2000))?,
+        pty_session: spawn("/bin/ed -p '> '", Some(time::Duration::from_secs(2)))?,
         // command which is sent when the instance of this struct is dropped
         // in the below example this is not needed, but if you don't explicitly
         // exit a REPL then rexpect tries to send a SIGTERM and depending on the repl

examples/tcp.rs

@@ -1,11 +1,12 @@
 use rexpect::spawn_stream;
 use std::error::Error;
 use std::net::TcpStream;
+use std::time;
 
 fn main() -> Result<(), Box<dyn Error>> {
     let tcp = TcpStream::connect("www.google.com:80")?;
     let tcp_w = tcp.try_clone()?;
-    let mut session = spawn_stream(tcp, tcp_w, Some(2000));
+    let mut session = spawn_stream(tcp, tcp_w, Some(time::Duration::from_secs(2)));
     session.send_line("GET / HTTP/1.1")?;
     session.send_line("Host: www.google.com")?;
     session.send_line("Accept-Language: fr")?;

src/lib.rs

@@ -18,9 +18,10 @@
 //!
 //! use rexpect::spawn;
 //! use rexpect::error::Error;
+//! use std::time;
 //!
 //! fn main() -> Result<(), Error> {
-//!     let mut p = spawn("ftp speedtest.tele2.net", Some(2000))?;
+//!     let mut p = spawn("ftp speedtest.tele2.net", Some(time::Duration::from_secs(2)))?;
 //!     p.exp_regex("Name \\(.*\\):")?;
 //!     p.send_line("anonymous")?;
 //!     p.exp_string("Password")?;
@@ -48,9 +49,10 @@
 //! ```no_run
 //! use rexpect::spawn_bash;
 //! use rexpect::error::Error;
+//! use std::time;
 //!
 //! fn main() -> Result<(), Error> {
-//!     let mut p = spawn_bash(Some(30_000))?;
+//!     let mut p = spawn_bash(Some(time::Duration::from_secs(30)))?;
 //!     p.execute("ping 8.8.8.8", "bytes of data")?;
 //!     p.send_control('z')?;
 //!     p.wait_for_prompt()?;
@@ -74,7 +76,8 @@ pub mod reader;
 pub mod session;
 
 pub use reader::ReadUntil;
-pub use session::{spawn, spawn_bash, spawn_python, spawn_stream, spawn_with_options};
+pub use session::Builder;
+pub use session::{spawn, spawn_bash, spawn_python, spawn_stream};
 
 // include the README.md here to test its doc
 #[doc = include_str!("../README.md")]

src/process.rs

@@ -147,8 +147,8 @@ impl PtyProcess {
     /// At the drop of `PtyProcess` the running process is killed. This is blocking forever if
     /// the process does not react to a normal kill. If `kill_timeout` is set the process is
     /// `kill -9`ed after duration
-    pub fn set_kill_timeout(&mut self, timeout_ms: Option<u64>) {
-        self.kill_timeout = timeout_ms.map(time::Duration::from_millis);
+    pub fn set_kill_timeout(&mut self, timeout: Option<time::Duration>) {
+        self.kill_timeout = timeout;
     }
 
     /// Get status of child process, non-blocking.

src/reader.rs

@@ -106,7 +106,7 @@ pub fn find(needle: &ReadUntil, buffer: &str, eof: bool) -> Option<(usize, usize
 /// - `strip_ansi_escape_codes`: Whether to filter out escape codes, such as colors.
 #[derive(Default)]
 pub struct Options {
-    pub timeout_ms: Option<u64>,
+    pub timeout: Option<time::Duration>,
     pub strip_ansi_escape_codes: bool,
 }
 
@@ -173,7 +173,7 @@ impl NBReader {
             reader: rx,
             buffer: String::with_capacity(1024),
             eof: false,
-            timeout: options.timeout_ms.map(time::Duration::from_millis),
+            timeout: options.timeout,
         }
     }
 
@@ -406,7 +406,7 @@ mod tests {
         let mut r = NBReader::new(
             f,
             Options {
-                timeout_ms: None,
+                timeout: None,
                 strip_ansi_escape_codes: true,
             },
         );
@@ -423,7 +423,7 @@ mod tests {
         let mut r = NBReader::new(
             f,
             Options {
-                timeout_ms: None,
+                timeout: None,
                 strip_ansi_escape_codes: true,
             },
         );